3000W Outdoor Air Conditioner with Environment Monitoring System
for Telecom Base Station
Product Characteristic
1. Cabinet Material
The cabinet is made of galvanized steel, with double walls,
thickness of outer plate: 1.5mm, thickness of inner plate: 0.8mm.
There are heat insulation between inner wall and outer wall. The
insulation material is 20mm PEF. The cabinet is assembled type.
2. Cabinet Structure
The cabinet is equipment cabinet, including 19” equipment
installation rack, with air conditioner on cabinet door.
3. Cabinet Door and Lock
The cabinet door uses embedded structure. The door opening angle is
larger than 110°and the door limit device can limit the opening
angle. The lock is theftproof three point lock, supporting padlock.
Each cabinet door include open door sensor, working together with
the environment monitoring unit.
4. Features
4.1 The cabinet is dustproof, sunproof and rainproof, which is used
in outdoor environment.
4.2 The cabinet cooling uses air conditioner.
4.3 Including -48VDC illumination lamp.
4.4 The cabinet includes power and environment monitoring unit,
which can send power failure alarm, door open alarm, temperature
and humidity alarm, smoke alarm, water alarm etc.
4.5 The layout of the cabinet is reasonable, which will facilitate
cable access, fixing and grounding. At the bottom of the cabinet,
there are entrance holes individually for power cable, signal cable
and optical cable.
4.6 All the cables, sealing and heat insulation used in the cabinet
are made from flame retardant materials.
4.7 The cabinet includes 19” standard installation rack.
5. Technical Specs
- Applicable environment conditions:
Operating temperature: -40°C ~ + 45°C
Storage temperature: -25°C ~ + 55°C
Transport temperature: -40°C ~ + 70°C
Relative humidity (RH): 5%~99%
Air pressure: 62kPa ~ 101kPa (similar to 0m ~ 5000m altitude)
- Material: good quality galvanized steel
- Surface treatment: degreasing, derusting, rustproof phosphating (or
galvanizing), powder coated.
- Cabinet load bearing: ≥600kg
- Ingress protection: IP65
- Flame retardance: comply with GB5169.7 test A
- Insulation resistance: the insulation resistance between grounding
devices and cabinet body parts is not lower than 2×104M/500V(DC).
- Withstand voltage: the withstand voltage between grounding devices
and cabinet body parts is not lower than 3000V(DC)/1min.
- Mechanical strength: each surface can bear upright pressure
>980N; after the door is open, its outer end can bear upright
pressure >200N.
Mass Production Model
| Cooling Capacity(L35/L35) | Product Model | Mounting Method | Dimension(W*D*H)mm | Dimension(W*D*H)mm Without flange | IP | Noise (dB A) | Certification |
| 1300W | CCA013EA | Side-Embedded | 482*200*782 | 445*200*745 | 55 | 65 | CE,CCC |
| 1500W | CCA015EA | Side-Embedded | 482*200*782 | 445*200*745 | 55 | 65 | CE,CCC |
| 2000W | CCA020EA | Side-Embedded | 482*200*782 | 445*200*745 | 55 | 65 | CE,CCC |
| 2300W | CCA023EA | Side-Embedded | 482*200*782 | 445*200*745 | 55 | 65 | CE,CCC |
| 2500W | CCA025EA | Side-Embedded | 536*225*1201 | 485*225*1150 | 55 | 65 | CE,CCC |
| 3000W | CCA030EA | Side-Embedded | 536*225*1201 | 485*225*1150 | 55 | 65 | CE,CCC |
Specification
1 . Technical Parameters
| Item | Type | Technical Parameter |
| Structure | Dimension | External Dimension: W*D*H 482*200*782mm,536*225*1201mm |
| Layout | 1 compartment |
| Equipment Installation Method | 19” rack |
| Door | With one front door, and special lock for outdoor cabinet (support
padlock) |
| Material | Galvanized steel, 1.5mm thick outer plate, 0.8mm thick inner plate |
| Heat Insulation | There are heat insulation between inner wall and outer wall. The
insulation material is 20mm PEF. |
| Structure | Welded or assembled |
| Ingress Protection | IP55 |
| Temperature Control | Cooling | AC220V air conditioner and DC48V fans |
| Lighting | LED lamp | 48V LED lamps (immovable), with protective circuit breaker |
| Temperature | Temperature | Working Temperature: -40°C ~ +55°C |
| | Storage Temperature: -50°C ~ + 70°C |
| | Transport Temperature: -50°C ~ +70°C |
| Humidity | Relative Humidity | 5% ~ 100% |
| Pressure | Air Pressure | 62kpa ~ 101kpa (similar to 0m ~ 5000m altitude) |
| Radiation Intensity | Solar Radiation Intensity | 1120 ×(1±5%)W/m2
|
2. Accessories List
| No. | Item | Quantity | Unit | Specs |
| 1 | Outdoor Telecom Cabinet | 1 | Set | (1) External Size H×W×D 482*200*782mm,536*225*1201mm (2) One compartment; (3) With one front door; with anti-theft three point lock for
outdoor cabinet (support padlock) (4) Material: galvanized steel; double walls, thickness of outer
plate: 1.5mm, thickness of inner plate: 0.8mm, with 20mm heat
insulation between two walls |
| 2 | Air Conditioner | 1 | Set | Power Supply: AC220V, 50-60Hz Cooling Capacity: 1300-3000W Model: CCA013EA to CCA030EA |
| 3 | Fans | 2 | PC | 12038, DC48V |
| 4 | Power Distribution Unit | 1 | Set | Grade B Lightning Proof AC Input: 63A/2P *1; AC Output: 16A/1P*4; DC Output: 16A/1P*4. Height: 4U |
| 5 | Environment Monitoring System | 1 | Set | 1× environment monitoring unit; 1× smoke sensor, 1×water sensor, 1× temperature&humidity sensor, 2× door sensor. |
| 6 | LED Lamp | 1 | Pc | DC48V |
| 7 | Package | 1 | Set | Wooden Case |
Product details
- Remote measuring, remote communication, remote control, which can
realize multiple automatic protection and comprehensive
self-testing function.
- Strict process control and famous brand components to ensure high
quality and reliability of this product
- Fit for harsh condition (T3),R134 a refrigerant
- Multiple self-protection design, RS485 communication port
(MODBUS-RTU protocol)
- LED display, all the setting can charge at the field.
- The heating function is optional
- Dry contact alarm output, NO/NC optional
- Anti-theft design, without the protection cover.
Installation Diagram
Application
The Outdoor Telecom Cabinet is mainly used in communication base
station, such as 4G system, communication/network integrated
service, access/transmission switching station, emergency
communication/transmission, etc.
Package and Shipping
FAQ
1. Q: How about the air cooler material?
A: It makes by 100% new plastic, pure copper for motor.
2. Q: What voltages you can do, could you make special voltages?
A: we can make DC48 and all AC voltage products for you.
3. Q: I want to use our own brand, is it OK?
A: It is possible, we supply the OEM products too.
4. Q: How about the warranty?
A: All the unit warranty is one year.
